product
SFSP series hammer mill
■ Applicable for coarse and fine grinding of Livestock, poultry, aqua feed and raw materials for starch, citric acid;
■ Particle size varies from 10-60 mesh
■Sieve is mounted centrifugally and gap between beaters and sieve is adjustable
■ Tear circle type grinding chamber; two options for rotors, therefore the particle size and capacity can be optimized.
Main Technical Parameters
|
model |
1180 -Ⅰ |
1180 –Ⅱ |
1180 –Ⅲ |
1180 –Ⅳ |
1180 –Ⅴ |
|
Power(kw) |
55/75 |
90/110 |
132/160 |
200/220/250 |
250/280/350 |
|
capacity(t/h) |
10～15 |
18～22 |
26～32 |
40～50 |
50～63 |
|
model |
1380 -Ⅰ |
1380 –Ⅱ |
1380 –Ⅲ |
1380 –Ⅳ |
1380 –Ⅴ |
|
power(kw) |
75/90 |
110/132 |
160/200 |
220/250 |
3000/350 |
|
capacity(t/h) |
14～19 |
21～28 |
35～43 |
48～55 |
62～70 |
SFSP 60 series Wide Hammer Mill
● This machine is an alternative for common Hammer Mill, widening screen surface, fast discharging and high output.
● The host can use shaker crush, crushed fine sieve blocked not easily, high fine, uniform particle size. It is an optimized equipment for fish feed production.
● It can be equipped with self-cleaning impeller feeding, belt magnetic feeding and other feeding modes;
● Coarse and fine grinding can be achieved without change of screen;
● Built-in grinding rotors are equipped to improve the efficiency by more than 25%.
● Flexible screen press unit is used to avoid flee of ground material.
● It can be equipped with air discharge base and be installed easily.
● It is widely used for grinding of corn, sorghum, wheat and bean, and also for grinding of raw materials with high moisture and high fibre.
Main technical parameters
|
Model |
Dia. of Rotor (mm) |
Width Of Grinding Chamber (mm) |
Speed of Rotor (rpm) |
Power (kw) |
Capacity (t/h) |
|
SFSP60×30 |
600 |
300 |
2980 |
18.5 |
2-3.5 |
|
SFSP60×38 |
600 |
380 |
2980 |
22 |
3-5 |
|
SFSP60×38 |
600 |
380 |
2980 |
37 |
5-7 |
|
SFSP60×45 |
600 |
450 |
2980 |
45 |
6-9 |
|
SFSP60×60 |
600 |
600 |
2980 |
55 |
7-11 |
|
SFSP60×75 |
600 |
750 |
2980 |
75 |
10-15 |
Note: The above indices are those when meeting the following conditions: raw material: corn, moisture content not higher than 14%, density no lower than 0.72t/m3, screen: hole diameter ￠3mm, hole-opening rate no less than 33%.
If you have any inquiries, please mail to info@metfis.com, we will serve you to your utmost.